SES offers HART Soft Modem running multiple instances in a single patented microprocessor
There is a need to run multiple HART modems on the Input/Output(I/O) concentrator side where an I/O controller communicates with multiple HART sensor nodes and collects and consolidates information for further processing upstream in the communication channel. The current state of the art solution uses multiple chips each doing the function of a single modem.
Benefits of our Solution:
- There is a considerable cost and power savings in consolidating multiple modems in one integrated circuit. Furthermore, this offers higher reliability due to a fewer component count.
- Our solution provides an efficient use of system resources such as sine tables, filter coefficients, demodulator functions, low pass filter functions and DMA
- By running the multiple instances of the modem in a single thread this can minimize process overhead such as interrupt service routines context save and restore so that the CPU utilization is optimized. This can result in lower CPU speed and lower power consumption. This also provides room to run more instances with a given CPU speed.
- Furthermore, the communication from the I/O controller host CPU to the modems can be consolidated over a single communication channel since now multiplier soft modems are running in one microprocessor. This communication can be over either normal UART or SPI, I2C.